Forum 6enligne.net

salut,

je viens de monter un m42 de 318is e30 sur motre 4x4 mais il ne démarre que tres rarement.

je cherche doc un schéma du motronic 1.7 pour tester.

Source à vérifier.

• 1 Fuel Pump Relay BR/GN
  2
  3 Injectors 1-3 BR/WT
  4
  5
  6 Ground BR/OR
  7
  8 Check Engine light BR
  9
  10
  11
  12 TPS Signal 5v BR
  13
  14 Common 5v GY/BU
  15
  16 Camshaft sensor input YL
  17 Fuel rate output WT
  18
  19
  20
  21
  22
  23
  24 Ignition cyl 3 BK
  25 Ignition cyl 1 BK
  26 Power Input RD/WT
  27 Main Relay control BR
  28 Ground BR/OR
  29 Idle Speed Control WT/YL
  30
  31
  32 Injectors 2-4 BR/WT
  33
  34 Ground
  35
  36 Charcoal Canister control BR
  37 O2 relay control BR/GN
  38
  39
  40
  41 AFM Input (5v) GY/YL
  42
  43 Common 5v Coolant and TPS BR/BK
  44 Camshaft sensor input BK
  45
  46
  47
  48
  49
  50
  51 Ignition cyl 4 BK
  52 Ignition cyl 2 BK
  53
  54 Power Input RD/WT
  55 Ground
  56 Start Input GN/YL
  57
  58
  59 Refrence output (Ground??) GY/WT
  60
  61
  62
  63
  64
  65
  66
  67 Crankshaft input sensor BK
  68 Crankshaft input sensor YL
  69
  70 O2 Input BK
  71 O2 Ground YL
  72
  73 Speed Signal input BK/WT
  74 Engine Speed Output
  75
  76
  77 Air temp input GY/VI
  78 Coolant temp input BR/RD
  79
  80 Diagnostic voltage GN/BU
  81
  82
  83
  84
  85 A/C Input BK/GY
  86 A/C Input BK/VI
  87 RXD Diagnostic WT/YL
  88 TXD Diagnistic WT/VI

nickel ça !

Un peu plus là:
http://325ix86.free....0_Injection.xps